Siirry pääsisältöönSiirry hakuun
HomeCombinesGleanerGleaner E / E III
Siirry sivupalkkiinSiirry alaosaan

Gleaner E / E III

67GleanerE3
Manufacturer
Models
Gleaner E, Gleaner E III
Years
1962-69
Info

After the short-lived T model, Gleaner's second entry into the smaller size category was a success. A total of 17,300 E models were produced between 1962 and 1967. The E's technology was similar to that of the A model. The reel was tine-free, the reel's hydraulic height adjustment was an optional extra, the rear axle was enclosed, separation was done with a straw walker conveyor located after the threshing drum, the steering was unassisted, and steering brakes were optional. The threshing drum was narrowed and the grain tank reduced in size, but otherwise the dimensions corresponded to the A model. The engine was a very low-tuned 36-horsepower Allis-Chalmers gasoline engine. A rather small power output for a 390 cm cutting platform. A cab was also available for this model.

The E III introduced in 1967 featured a more angular rear end, a redesigned cab, improved hydraulics, increased power, and a larger grain tank.

This is an automated translation. Please report any issues in the translation.

Technical data
ModelGleaner EGleaner E III
Options
Imported to FinlandNoNo
Years1962-671967-69
First year sold19621967
Last year sold19671969
Power3662.7
EngineA-CA-C
Engine typePower-CrafterPower-Crafter
Displacement3703 cm³3703 cm³
Cyl/turbo44
Power hp DIN3662.7
Alternative hpA-C G226 diesel hpA-C G226 diesel hp
Fuel tank121 l121 l
Transmissionmech.mech.
Gears33
Speed min-max.-1,5-23,0 km/h
Cutting width390 cm390 cm
Cutting width, alternative300, 360 cm300, 360 cm
Threshing cyl. diameter49 cm49 cm
Threshing cyl. width69 cm69 cm
Number of straw walkers33
Area of walkers(351) dm²(351) dm²
Lenght of walkers(419) cm(419) cm
Straw shieve85 dm²85 dm²
Bottom shieve77 dm²77 dm²
Total screening area173173
Overall lenght-680 cm
Overall width439 cm439 cm
Width without header-229 cm
Height without cabin-264 cm
Weight without cabin-3740 kg
Grain tank14 hl23.3 hl
Tyres front (Finland)14.9/13-2614.9/13-26
Tyres front, alternative-18.4/15-26
Tyres rear (Finland)6.00-166.00-16
Tyres rear, alternative-7.50-16
Reel forward/backw. adjustmentwrenchwrench
Threshing cyl. speed adjustment-/adj, in cabinadj, in cabin
Bottom sieveadj.adj.
Type of cutting platform floatingspringspring
The data has been collected primarily from brochures. In some cases, sources contain conflicting information. In such cases, we have attempted to select the most reliable information. There is particularly significant variation in speed data, which varies depending on factors such as tire size. For tires, only the size most commonly used in Finland is listed. Other changes during the model history have been addressed in the text section. For the front axle lock, the Finnish term "hammaslukko" (gear lock) is used for all 100% locks.