Siirry pääsisältöönSiirry hakuun
Siirry sivupalkkiinSiirry alaosaan

Deutz 2506 – 5206

78Deutz4506
Manufacturer
Models
Deutz 2506, Deutz 3006, Deutz 4006, Deutz 4506, Deutz 5206
Years
1974-81
Info

In 1974, the updated 06 series tractors were introduced. The color scheme was changed to light green with a dark purple chassis. In 1978, the chassis color was changed to dark gray and the rims from red to silver, in accordance with the DX series. The 06 series was a basic tractor, delivered either with a roll-over protection structure or, depending on the country, equipped with a cab.

The new model was the 5206, which, unlike its predecessor the 5506, was equipped with a 3-cylinder engine. The 5206 had disc brakes. An additional gear was available for the transmission, increasing the speed to 30 km/h. In terms of dimensions, the 5206 was smaller than its predecessor and corresponded to the 4506. Four-wheel-drive models featured hydrostatic steering. The front axle was still a Sige. The last model years offered a limited-slip differential as an optional accessory.

This is an automated translation. Please report any issues in the translation.

Technical data
ModelDeutz 2506Deutz 3006Deutz 4006Deutz 4506Deutz 5206
Options
Manufacturer nameDeutzDeutzDeutzDeutzDeutz
Imported to FinlandNoNoNoNoNo
Years1974-811974-811974-811974-811974-81
First year sold19741974197419741974
Last year sold19811981198119811981
Engine modelF2L 912F2L 912F3L 912F3L 912F3L 912
Cyl/Turbo/Intercooler22333
Displacement1885 cm³1885 cm³2827 cm³2827 cm³2827 cm³
Bore x stroke100×120 mm100×120 mm100×120 mm100×120 mm100×120 mm
Rated power hp/rpm DIN24/210030/230035/215040/230051/2300
Rated power2430354051
Rated speed21002300215023002300
Torque Nm/rpm DIN-101/1600129/1500-175/1600
Gears8+28+28+2 (8+4)8+2 (8+4)8+4 (9+4)
Synchronized gears---/8-/88 (9)
Speeds in km/h2,0-25,02,0-25,02,1-25,01,9-25,02,2-26,5
Hydr. flow l/min26.8 l/min26.8 l/min25.5 l/min27.3 l/min27.3 l/min
Hydraulic pressure175 bar175 bar175 bar175 bar175 bar
Lift controlsmech.mech.mech.mech.mech.
Lift capacity1560 kg1560 kg1560 kg1560 kg1900 kg
PTO speeds540540540540 (1000)540 (1000)
Brakesdrum brakesdrum brakesdrum brakedrum brakesdry disc
Steeringmech.mech.mech.mech./hydrost.mech./hydrost.
Turning circle m 2WD6.86.87.27.27.2
Turning circle m 4WD---9.29.2
Front tyres 2WD5,00-166,00-166,00-166,00-167,50-16
Front tyres 4WD---7.50-187.50-18
Rear tyres 2WD11,2-2811,2-2812,4-3212,4-3212,4-36
Rear tyres 4WD---12.4-3212.4-36
Weight 2WD1750 kg1850 kg1945 kg1950 kg2010 kg
Weight 4WD--2270 kg2290 kg2375 kg
Height with cab234 cm234 cm239 cm239 cm239 cm
Length (2WD/4WD)334 cm335 cm343 cm347 cm347 cm
Wheelbase (2WD/4WD)187 cm187/190 cm200 cm200/206 cm200/206 cm
Fuel tank70 l70 l70 l70 l70 l
Creeper gear---opt.opt.
The data has been collected primarily from brochures. In some cases, sources contain conflicting information. In such cases, we have attempted to select the most reliable information. There is particularly significant variation in speed data, which varies depending on factors such as tire size. For tires, only the size most commonly used in Finland is listed. Other changes during the model history have been addressed in the text section. For the front axle lock, the Finnish term "hammaslukko" (gear lock) is used for all 100% locks.